| 琉璃瓦成型方式 |
| 添加时间：2017/8/9 16:12:03 浏览次数： |
| 成型方式 Forming method 琉璃瓦的成型方法，一般采用挤制成型、手工印坯、注浆成型等方法。西式瓦采用塑压成型。 The forming method of the glazed tile is generally used to make moulded, hand-printed and grouting. The western tile is molded by plastic pressure. 挤型成型 Extrusion molding type 琉璃瓦的普通瓦件筒瓦、板瓦采用挤制成型，挤坯机（TCL350真空挤出机）是在搅泥机的出泥口加装一个与坯体尺寸相同的机头，待坯挤出后，用钢丝切成瓦坯，放支架上晾干、修坯、干燥后烧成。 Ordinary tile pieces pantile, glazed tile floor tile made type squeeze, squeeze machine (TCL350 vacuum extruder) is in the stirring machine out of the mud with a mouth and body for the same size of the nose, after waiting for billet extrusion, wire cut into tile billet, put on dry, fettling, burnt after drying. 成型方式 Forming method 琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。手工成型是将坯泥拍打成泥饼，在石膏模内压印出有花纹的坯体，稍干后起坯贴接，将工作面修整打光。 The tick of the glazed tile, the dripping water tile and the beast, the cap, the window and the right kiss, the beast and other components are formed by hand forming or grouting. Hand forming is the slurry of the slurry to the mud cake, in plaster mold printing to have the pattern of the blank body, a little dry after the blank paste, the working face to finish polishing. 塑压成型 Plastic moulding 西式琉璃瓦主要采用塑压成型，经真空练泥机挤出并切割成粗坯后，再用带有模具的压瓦机进行精细的外形压 The western glazed tile mainly USES plastic pressure forming, after the vacuum machine extrude and cut into rough, then the fine shape pressure is carried out with the pressing tile with the mould |
| 上一页 琉璃瓦制作工艺 |
| 下一页 琉璃瓦施工注意事项 |
Copyright © 技术支持：遨游网络